Immunotoxicity of poly (lactic-co-glycolic acid) nanoparticles: influence of surface properties on dendritic cell activation.

Modified nanoparticles (NPs) can interact with the immune system by causing its activation to fight tumors or for vaccination. During this activation, dendritic cells (DCs) are effective in generating robust immune response. However, the effect of nanomaterials on dendritic cell (DC) maturation, and the associated adjuvant effect, should be assessed as a novel biocompatibility criteria for biomaterials since immune consequences may constitute potential complications in nanomedicine. Among emerging biomaterials, poly(lactic-co-glycolic acid) NPs (PLGA NPs) are widely explored for various applications in which the degree of desired adjuvant effect may vary. As contradictory results are reported regarding their effects on DCs, we aimed at clarifying this point with particular emphasis on the relative impact of particle surface properties. To that end, NP uptake and effects on the viability, phenotype, and secretory activity of DC primary cultures. Intracellular signaling pathways were explored and evaluated. Immature human and murine DCs were exposed to cationic, neutral, or anionic PLGA NPs. Particle uptake was assessed by both confocal microscopy and flow cytometry. Cell viability was then evaluated prior to the study of maturation by examination of both surface marker expression and cytokine release. Our results demonstrate that PLGA NPs are rapidly engulfed by DCs and do not exert cytotoxic effects. However, upon exposure to PLGA NPs, DCs showed phenotypes and cytokine secretion profiles consistent with maturation which resulted, at least in part, from the transient intracellular activation of mitogen-activated protein kinases (MAPKs). Interestingly, NP-specific stimulation patterns were observed since NP surface properties had a sensible influence on the various parameters measured.

Protection against Clostridium difficile infection in a hamster model by oral vaccination using flagellin FliC-loaded pectin beads.

Clostridium difficile flagellin FliC is a highly immunogenic pathogen-associated molecular pattern playing a key role in C. difficile pathogenesis and gut colonization. Here, we designed an oral vaccine against C. difficile with FliC encapsulated into pectin beads for colonic release. Bead stability and FliC retention was confirmed in vitro using simulated intestinal media (SIM), while bead degradation and FliC release was observed upon incubation in simulated colonic media (SCM). The importance of FliC encapsulation into pectin beads for protection against C. difficile was assessed in a vaccination assay using a lethal hamster model of C. difficile infection. Three groups of hamsters orally received either FliC-loaded beads or unloaded beads in gastro-resistant capsule to limit gastric degradation or free FliC. Two other groups were immunized with free FliC, one intra-rectally and the other intra-peritoneally. Hamsters were then challenged with a lethal dose of C. difficile VPI 10463. Fifty percent of hamsters orally immunized with FliC-loaded beads survived whereas all hamsters orally immunized with free FliC died within 7 days post challenge. No significant protection was observed in the other groups. Only intra-peritoneally immunized hamsters presented anti-FliC IgG antibodies in sera after immunizations. These results suggest that an oral immunization with FliC-loaded beads probably induced a mucosal immune response, therefore providing a protective effect. This study confirms the importance of FliC encapsulation into pectin beads for a protective oral vaccine against C. difficile.

Source-receptor probability of atmospheric long-distance dispersal of viruses to Israel from the eastern Mediterranean area.

Viruses that affect the health of humans and farm animals can spread over long distances via atmospheric mechanisms. The phenomenon of atmospheric long-distance dispersal (LDD) is associated with severe consequences because it may introduce pathogens into new areas. The introduction of new pathogens to Israel was attributed to LDD events numerous times. This provided the motivation for this study which is aimed to identify all the locations in the eastern Mediterranean that may serve as sources for pathogen incursion into Israel via LDD. This aim was achieved by calculating source-receptor relationship probability maps. These maps describe the probability that an infected vector or viral aerosol, once airborne, will have an atmospheric route that can transport it to a distant location. The resultant probability maps demonstrate a seasonal tendency in the probability of specific areas to serve as sources for pathogen LDD into Israel. Specifically, Cyprus' season is the summer; southern Turkey and the Greek islands of Crete, Karpathos and Rhodes are associated with spring and summer; lower Egypt and Jordan may serve as sources all year round, except the summer months. The method used in this study can easily be implemented to any other geographic region. The importance of this study is the ability to provide a climatologically valid and accurate risk assessment tool to support long-term decisions regarding preparatory actions for future outbreaks long before a specific outbreak occurs.

Parameters for Stable Water-in-Oil Lipiodol Emulsion for Liver Trans-Arterial Chemo-Eembolization.

PURPOSE: Water-in-oil type and stability are important properties for Lipiodol emulsions during conventional trans-arterial chemo-embolization. Our purpose is to evaluate the influence of 3 technical parameters on those properties. MATERIALS AND METHODS: The Lipiodol emulsions have been formulated by repetitive back-and-forth pumping of two 10-ml syringes through a 3-way stopcock. Three parameters were compared: Lipiodol/doxorubicin ratio (2/1 vs. 3/1), doxorubicin concentration (10 vs. 20 mg/ml) and speed of incorporation of doxorubicin in Lipiodol (bolus vs. incremental vs. continuous). The percentage of water-in-oil emulsion obtained and the duration until complete coalescence (stability) for water-in-oil emulsions were, respectively, evaluated with the drop-test and static light scattering technique (Turbiscan). RESULTS: Among the 48 emulsions formulated, 32 emulsions (67%) were water-in-oil. The percentage of water-in-oil emulsions obtained was significantly higher for incremental (94%) and for continuous (100%) injections compared to bolus injection (6%) of doxorubicin. Emulsion type was neither influenced by Lipiodol/doxorubicin ratio nor by doxorubicin concentration. The mean stability of water-in-oil emulsions was 215 ± 257 min. The emulsions stability was significantly longer when formulated using continuous compared to incremental injection (326 ± 309 vs. 96 ± 101 min, p = 0.018) and using 3/1 compared to 2/1 ratio of Lipiodol/doxorubicin (372 ± 276 vs. 47 ± 43 min, p = <0.0001). Stability was not influenced by the doxorubicin concentration. CONCLUSION: The continuous and incremental injections of doxorubicin in the Lipiodol result in highly predictable water-in-oil emulsion type. It also demonstrates a significant increase in stability compared to bolus injection. Higher ratio of Lipiodol/doxorubicin is a critical parameter for emulsion stability too.

Using Synoptic Systems' Typical Wind Trajectories for the Analysis of Potential Atmospheric Long-Distance Dispersal of Lumpy Skin Disease Virus.

Lumpy skin disease virus (LSDV) is an infectious, arthropod-borne virus that affects mostly cattle. Solitary outbreaks have occurred in Israel in 1989 and 2006. In both years, the outbreaks occurred parallel to a severe outbreak in Egypt, and LSDV was hypothesized to be transmitted from Egypt to Israel via long-distance dispersal (LDD) of infected vectors by wind. The aim of this study was to identify possible events of such transport. At the first stage, we identified the relevant synoptic systems that allowed wind transport from Egypt to Israel during the 3 months preceding each outbreak. Three-dimensional backwards Lagrangian trajectories were calculated from the receptor sites in Israel for each occurrence of such relevant synoptic system. The analysis revealed several events in which atmospheric connection routes between the affected locations in Egypt and Israel were established. Specifically, during the 1989, Damietta and Port Said stand out as likely sources for the outbreak in Israel. In 2006, different locations acted simultaneously as potential sources of the outbreak in Israel. These locations were situated in the Nile delta, the Suez Canal and in northern Sinai. The analysis pointed out Sharav low and Shallow Cyprus low to the North to be the most likely systems to enable windborne transport from Egypt to Israel. These findings are of high importance for the analysis of the risk of transmission of vectorborne viruses in the eastern Mediterranean region.

Influence of polymer end-chemistry on the morphology of perfluorohexane polymeric microcapsules intended as ultrasound contrast agents.

Ultrasound contrast agents (UCAs) composed of a liquid perfluorocarbon (PFC) core surrounded by a polymer shell have shown promising echogenicity as well as stability. In a strategy to optimize the ultrasound properties of these systems, encapsulating a liquid PFC with a low boiling point such as perfluorohexane (PFH) was suggested. The ultimate aim of these systems would be to induce phase-transition of the liquid PFH into gas by acoustic droplet vaporization (ADV) to further increase the UCA acoustic response. Microcapsules with a perfluorohexane core have been developed by an emulsion-evaporation process, using three biodegradable polymers: PLGA and PLA with acid (PLA-COOH) and ester (PLA-COOR) terminations. Despite their similar properties, these polymers were found to strongly influence the final microcapsule morphology. While PLGA was able to form nice core-shell microcapsules, the use of PLA-COOH led to decentered microcapsules and big "eye" morphologies, and PLA-COOR induced the formation of "acorn" morphologies. To shed light on morphologies disparities, polymer interfacial behavior was studied at the dichloromethane-water and the PFH-dichloromethane interfaces. One can conclude that the core-shell structure is the result of a significant adsorption of the polymer at the dichloromethane-water interface together with a good stability of the PFH droplet within the emulsion globule. Previous work has shown that the capsule's thickness-to-radius (T/R) ratio can be controlled easily by varying the polymer to perfluorocarbon proportions. This versatility was confirmed for PFH capsules with PLA-COOH and PLGA shells. Finally, the encapsulation efficiency of PFH was assessed by relating the T/R ratio to the volume fraction of PFH and by (19)F NMR spectroscopy.

Beads made of α-cyclodextrin and soybean oil: the drying method influences bead properties and drug release.

Freeze-dried beads made of α-cyclodextrin and soybean oil were reported previously as an efficient system for the oral delivery of lipophilic drugs. In the present study, oven-drying was evaluated as another method for drying beads. Oven-drying was optimised and the properties of the resulting beads were assessed. The behavior of oven-dried beads and the release of indomethacin from these beads were evaluated in vitro in simulated gastrointestinal fluids and compared with those of freeze-dried beads. The stability of freeze-dried and oven-dried unloaded beads stored at 25°C for 12 months and at 40°C for 6 months in closed and open vials was also studied by different techniques. An oven-drying time of 6 hours at 25°C was chosen as optimal conditions. Oven-dried beads exhibited a sticky texture making them difficult to handle. They were harder, less fragile and smaller than the freeze-dried ones. The characteristics of oven-dried beads make them more resistant in vitro even in media containing bile salt. The rate of indomethacin release from oven-dried beads was much slower than that from the freeze-dried ones. Whatever the drying method, beads must be stored at room temperature protected from humidity. However, no products of oil degradation were detected with both kinds of beads. This work clearly emphasized that the drying method of the beads had a strong influence on their properties, behavior in simulated gastrointestinal fluids and drug release.

Formulations based on alpha cyclodextrin and soybean oil: an approach to modulate the oral release of lipophilic drugs.

The purpose of this work was to investigate the potential of α-cyclodextrin combined to soybean oil-based formulations to modulate the release of a model drug, indomethacin. Dry emulsion, naked and coated beads were prepared from the same initial formulation using the same manufacturing process. Dry emulsion was selected to accelerate drug release while beads coated with α-cyclodextrin were designed to sustain it. Indomethacin-loaded systems were prepared, characterised and evaluated in vitro. Pharmacokinetic studies were performed in fasted and fed rats. The presence of the α-cyclodextrin coat was confirmed by confocal microscopy, and an increase of the mass and diameter of the beads. The layer of α-cyclodextrin improved their resistance in simulated gastro-intestinal fluids. In vitro, the dissolution of indomethacin was slower with coated beads than with emulsion and naked beads. Lipid-based formulations showed an increase of relative bioavailability of IND versus Indocid®. Whatever the formulation, greater and faster release of indomethacin was noticed in sodium taurocholate-rich medium and in fed rats. Compared to naked beads, an increased Cp(max) with a shorter T(max) was observed with the emulsion while T(max) and MRT were increased and Cp(max) reduced with the coated beads. Interestingly, formulations based on alpha cyclodextrin and soybean oil can modify the release of a lipophilic drug depending on the system formed.

[Potential of liposomes for the intravitreal injection of therapeutic molecules]. / Potentiel des liposomes pour l'injection intravitréenne de molécules thérapeutiques.

Intravitreal administration has been widely used since 20 years and has been shown to improve the treatment of diseases of the posterior segment of the eye with infectious origin or in edematous maculopathies. This route of administration allows to achieve high concentration of drug in the vitreous and avoids the problems resulting from systemic administration. However, two basic problems limit the use of intravitreal therapy. Many drugs are rapidly cleared from the vitreous humor; therefore, to reach and to maintain effective therapy repeated injections are necessary. Repeated intravitreal injections increase the risk of endophthalmitis, damage to lens, retinal detachment. Moreover, some drugs provoke a local toxicity at their effective dose inducing side-effects and possible retinal lesions. In this context, the development and the use of new drug delivery systems for intravitreal administration are necessary to treat chronic ocular diseases. Among them, particulate systems such as liposomes have been widely studied. Liposomes are easily injectable and permit to reduce the toxicity and to increase the residence time of several drugs in the eye. They are also able to protect in vivo poorly-stable molecules from degradation such as peptides and nucleic acids. Some promising results have been obtained for the treatment of retinitis induced by cytomegalovirus in human and more recently for the treatment of uveitis in animal. Finally, the fate of liposomes in ocular tissues and fluids after their injection into the vitreous and their elimination routes begin to be more known.

Cationic nanoemulsion as a delivery system for oligonucleotides targeting malarial topoisomerase II.

A promising strategy based on the antisense oligonucleotides against the Plasmodium falciparum topoisomerase II has been considered using cationic nanoemulsion as oligonucleotide delivery system. Phosphodiester and chemically modified phosphorothioate oligonucleotides bearing negative charges were adsorbed on positively charged emulsion composed of medium chain triglycerides, egg lecithin, 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP), and water, at different +/- charge ratios (positive charges from cationic lipid/negative charges from oligonucleotide): +0.5/-, +2/-, +4/- and +6/-. The physicochemical properties of the complexes were determined, as well as their stability in culture medium. Their interaction with erythrocytes through hemolysis, binding experiments and confocal microscopy were also evaluated. Finally, the in vitro evaluation of parasite growth and reinfection capacity was performed. The overall results showed that antisense oligonucleotides against P. falciparum topoisomerase II gene can be efficiently adsorbed onto a cationic nanoemulsion forming complexes. Whereas unloaded nanoemulsion displayed an hemolytic effect due to the presence of the cationic lipid, this was not the case of loaded nanoemulsion at low +/- ratios. Oligonucleotide-loaded nanoemulsions were found to be located inside the infected erythrocytes, inhibiting efficiently parasite growth (until 80%) and causing a delay in P. falciparum life cycle.

Beads made of cyclodextrin and oil for the oral delivery of lipophilic drugs: in vitro studies in simulated gastro-intestinal fluids.

The aim of this work was to investigate the stability in vitro, in simulated gastro-intestinal fluids, of beads, made of α-cyclodextrin and soybean oil, and to study the release of progesterone, a model of lipophilic drug. This was evaluated over time by the monitoring of the proportion of intact beads, their volume and the percentage of progesterone dissolved. Their incubation in the simulated gastric fluid provoked a moderate reduction of their number (20%) and a decrease of their volume (50%) after 55 min. Whatever the intestinal medium subsequently introduced, bead number and volume decreased more until bead disintegration that appeared faster in sodium taurocholate rich-medium. In such fluid, the amount of progesterone dissolved increased rapidly between 65 and 180 min, with both beads and emulsion to be equal after 85 min. With soft capsules, the increase was more gradual. In sodium taurocholate free-medium, more progesterone was dissolved from the emulsion than from beads or soft capsules. The release of progesterone from beads resulted from the erosion of their matrix and its partition equilibrium between oily micro-droplets and aqueous phase. The original structure of beads confers to this multiparticulate system interesting properties for the oral delivery of lipophilic drugs.

Structure of a single model to describe plutonium and americium decorporation by DTPA treatments.

The aim of this study is to propose a single modeling structure to describe both plutonium and americium decorporation by DTPA, which is based on hypotheses mostly validated by experimental data. Decorporation efficacy of extracellular retention depends on the concentration ratio of DTPA vs. actinides and varies in each compartment according to the amount of biological ligands and their affinity for actinides. By contrast, because the relatively long residence time of DTPA after its cell internalization and the stability of actinide-DTPA complexes, intracellular decorporation efficacy is mainly controlled by a DTPA/actinide ratio, which is specific to each retention compartment. Although the affinity of DTPA is much lower for americium than for plutonium, a larger decorporation of americium can be obtained, which is explained by different biological ligands and/or their affinity for the actinide. Altogether, these results show that the relative contribution of intra vs. extracellular decorporation varies depending on the actinide, the chemical form of radionuclides, the galenic formulation of DTPA, and the treatment schedule.

[Interactions between cyclodextrins and triglycerides: from emulsion stabilisation to the emergence of a new drug delivery system called "beads"]. / Interactions entre les cyclodextrines et les triglycérides : de la stabilisation des émulsions à l'obtention d'un nouveau système galénique appelé << billes >>.

Natural cyclodextrins are cyclic oligosaccharides which can be modified to obtain more water soluble or insoluble derivatives. The main interest of cyclodextrins results from their ability to form an inclusion complex with hydrophobic molecules. Inclusion constitutes a true molecular encapsulation. This property is employed in pharmaceutical industry to facilitate the formulation of poorly water soluble and/or fragile drugs. A more recent application of cyclodextrins consists in their use in the preparation of dispersed systems such as micro- and nanoparticles or even liposomes. When incorporated in dispersed systems, cyclodextrin can enhance drug solubility, drug stability and drug loading. Interestingly, cyclodextrins themselves can also be employed to form or stabilise dispersed systems (material or emulsifying agent). For example, the interactions between cyclodextrins with components of the vegetable oils (more especially with triglycerides) allow to stabilise simple or multiple emulsions but also to form particles called "beads". Very rich in oil, this novel lipid carrier presents an important potential for the encapsulation of highly lipophilic compounds and their delivery by topical and oral routes. These two applications are more particularly developed in the present paper.

Simplified structure of a new model to describe urinary excretion of plutonium after systemic, liver or pulmonary contamination of rats associated with Ca-DTPA treatments.

This study validates, by targeted experiments, several modeling hypotheses for interpretation of urinary excretion of plutonium after Ca-DTPA treatments. Different formulations and doses of Ca-DTPA were administered to rats before or after systemic, liver or lung contamination with various chemical forms of plutonium. The biokinetics of plutonium was also characterized after i.v. injection of Pu-DTPA. Once formed, Pu-DTPA complexes are stable in most biological environments. Pu-DTPA present in circulating fluids is rapidly excreted in the urine, but 2-3% is retained, mainly in soft tissues, and is then excreted slowly in the urine after transfer to blood. Potentially, all intracellular monoatomic forms of plutonium could be decorporated after DTPA internalization involving slow urinary excretion of Pu-DTPA with half-lives varying from 2.5 to 6 days as a function of tissue retention. The ratio of fast to slow urinary excretion of Pu-DTPA depends on both plutonium contamination and Ca-DTPA treatment. Fast urinary excretion of Pu-DTPA corresponds to extracellular decorporation that occurs beyond a threshold of the free DTPA concentration in circulating fluids. Slow excretion corresponds mostly to intracellular decorporation and depends on the amount of intracellular DTPA. From these results, the structure of a simplified model is proposed for interpretation of data obtained with Ca-DTPA treatments after systemic, wound or pulmonary contamination by plutonium.

Quantification of pegylated phospholipids decorating polymeric microcapsules of perfluorooctyl bromide by reverse phase HPLC with a charged aerosol detector.

Polyethylene glycol (PEG) chains covalently linked to phospholipids are often used in the preparation of lipid or even polymer colloidal particles to avoid recognition and clearance by the reticuloendothelial system and to increase their plasmatic half-life. To the best of our knowledge, no direct method allows yet to quantify these pegylated phospholipids. The aim of this work was to develop a method for the quantification of a typical pegylated phospholipid, 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000], DSPE-PEG2000, associated to polymeric microcapsules of perfluorooctyl bromide (PFOB). Reverse phase high-performance liquid chromatography (HPLC) was used, coupled with a corona charged aerosol detection (HPLC-CAD). Calibrations standards consisted of plain microcapsules and pegylated phospholipids (DSPE-PEG2000) in the concentration range of 2.23-21.36 microg/mL (0.22-2.14 microg injected). Calibration curve was evaluated with two different model, linear and power model. The power model describes experimental values better than the linear model, for pegylated phospholipids with the CAD detector. The correlation coefficient for the power model was 0.996, and limits of detection and quantification obtained were 33 and 100 ng, respectively. This method proved to be selective and sensitive; the accuracy of the method ranged from 90 to 115% and the relative standard deviation was

Drainage of fluorescent liposomes from the vitreous to cervical lymph nodes via conjunctival lymphatics.

The use of liposomes as carriers for the delivery of biologically active molecules into the eye is of major interest. Indeed, encapsulation of biologically active molecules in liposomes may increase their bioavailability and may induce a sustained release, thus avoiding repeated intraocular injections and reducing side effects. We describe here the fate of rhodamine-conjugated liposomes (Rh-Lip) injected into the vitreous of normal Lewis rats. Twenty-four hours after intravitreal injection fluorescent liposomes were detected in the vitreous, the inner layer of the retina and to a lesser extent in the anterior segment of the eye. In addition, numerous Rh-Lip were also observed in the episclera and conjunctival stroma, in conjunctival lymphatic vessels and cervical lymph nodes (LN) draining the conjunctiva and the eye. In the LN, Rh-Lip were taken up by resident macrophages adjacent to CD4+ and CD8+ T cells. Thus, intravitreal injection of anti-inflammatory drugs loaded in liposomes could modulate the ocular immune microenvironment. In addition the passage of drugs into the cervical LN could alter the immune status of these LN and contribute to the regulation of intraocular inflammation. Our results suggest that this phenomenon should be taken into account to design new therapies based on intraocular drug administration.

Formulation and characterisation of beads prepared from natural cyclodextrins and vegetable, mineral or synthetic oils.

A continuous external shaking for 2.5 days of a mixture composed of alpha-cyclodextrin (6%), soybean oil (19.6%) and water (74.4%) resulted in a calibrated lipid carrier namely bead with a high fabrication yield. The purpose of this work was to explore the possibility to substitute alpha-cyclodextrin by other natural cyclodextrins, i.e. beta- and gamma-cyclodextrin and then soybean oil by mineral (Primol) 352 and Marcol 82) or synthetic (Silicon 200) fluid 10, 50 or 100cSt) oils. Beads can be successfully prepared using Marcol 82 with alpha-cyclodextrin and Silicon 50 or 100cSt with gamma-cyclodextrin. The area inside oil/cyclodextrin/water ternary diagram corresponding to bead occurrence was superior for the Marcol 82/alpha-cyclodextrin couple compared to that observed with soybean oil/alpha-cyclodextrin couple. Only a few ratios of Silicon 50 and 100cSt/gamma-cyclodextrin/water led to beads. The combinations which did not induce bead occurrence gave either emulsions, two non-miscible liquids or a solid mixture. Whatever the materials used, beads exhibited similarities: presence of a crystalline organisation and viscoelastic properties. Manufacturing process of paraffin- and silicon-based beads need further optimisation to increase fabrication yield and later on, to take advantages from the high stability of both oils for the formulation of drugs with beads.

Decorporation of plutonium by pulmonary administration of Ca-DTPA dry powder: a study in rat after lung contamination with different plutonium forms.

This study evaluates the decorporation efficacy of a pulmonary administration of a new Ca-DTPA (diethylenetriaminepentaacetic acid) dry powder (18 micromol kg(-1) of body mass) after pulmonary contamination of rats with different Pu compounds. After inhalation of PuO2, a delayed intratracheal administration of DTPA cannot reduce significantly the retention of Pu in the lungs but limits its transfer in liver and skeleton. After pulmonary contamination by Pu nitrate, early insufflation of the DTPA powder appears twice as more efficient than an i.v injection of DTPA (30 micromol kg(-1)) to reduce Pu retention in the lungs and is as effective as i.v. injection to limit the extrapulmonary deposit. In contrast, a delayed administration of DTPA cannot reduce the lung or extrapulmonary retention. In conclusion, the improvement of aerodynamic properties of DTPA powder leads to an increase of DTPA amount deposited in the lungs and enhances the body decorporation.

alpha-Cyclodextrin/oil beads: an innovative self-assembling system.

The aim of this work was to characterise a new type of particulate system, named beads, prepared by a straightforward technique starting from a mixture of alpha-cyclodextrin aqueous solution and soybean oil without the use of any organic solvent or surface-active agent. Mechanisms involved in bead formation were also investigated. Optimal ratio between alpha-cyclodextrin (6%, w/w), soybean oil (19.6%, w/w) and water (74.4%, w/w) led to homogeneous bead size (1.6 mm) with a fabrication yield superior to 80% after a continuous external shaking during 2.5 days. After freeze-drying, oil and alpha-cyclodextrin contents were estimated at 80% (w/w) and 20% (w/w), respectively. X-ray diffraction studies revealed that beads presented a crystalline organisation and microscopic techniques showed that their inner structure was constituted by a matrix containing oily compartments. Beads offer interesting prospects for the microencapsulation of lipophilic and poorly stable molecules. Due to their semi-solid consistency and their ability to be freeze-dried, these beads have great potentialities for pharmaceutical (oral and topical routes) and cosmetic applications.

Direct lung delivery of a dry powder formulation of DTPA with improved aerosolization properties: effect on lung and systemic decorporation of plutonium.

DTPA, an actinide chelating agent, has demonstrated its ability to complex plutonium (Pu) and to facilitate its urinary excretion after internal contamination. This process, known as decorporation is crucial to diminish the burden of Pu in the body. The ability to deliver a chelating agent directly to the alveolar region may increase its local concentration as compared to systemic delivery and therefore increase the extent of decorporation. Second, inhalation offers the potential for needle-free, systemic delivery of small molecules and would be convenient in case of nuclear accident as a first pass emergency treatment. To benefit from the improvement of inhalation technology, we have formulated DTPA into porous particles by spray-drying with dl-Leucine, DPPC and ammonium bicarbonate. The optimized particles possess a volume mean geometric diameter around 4.5 mum and crumpled paper morphology. The in vitro aerodynamic evaluation shows that about 56% of the powder should deposits in the lungs, with about 27% in the alveolar region, an improvement as compared with the micronized powder available with the Spinhaler. After pulmonary administration to rats contaminated with PuO(2), a 3-fold increase of the Pu urinary excretion was observed, but the dissolution of PuO(2) in the lungs was not enhanced.